Lifting loops
Cross corner
It has an open fastening strap on the big bag. It has load capacity, useful height and fixing size to be defined according to the needs of each customer.
Corner loop
Attached to the side of the big bag, it has useful height and fastening that is defined according to the specific need of each client. Also taken into account are the maximum working load and the safety factor.
Stevedore
They are fixed on the Cross Corner or Corner Loops. They are designed to turn the four lifting points into just two.
Loops with rings
They are fixed to each of the Cross Corner or Side Corner Loops. They are intended to assist the operator at the time of the lifting device.
Filling options
Full open top
It has a total upper opening, without option of use a closure system.
Skirt
It has an upper opening with skirt, allowing closure.
Standard filling spout
It has a top valve, with diameter to be defined, with option of use a closure system.
Filling with top flap
It has a top flap, with option of use a closure system.
Discharge options
Plain base
It has a closed bottom, without opening, to unload the product.
Standard discharge spout
It has bottom with valve for discharge, with diameter to be defined, and with the possibility of closing.
Bottom with eyelets
It has bottom with discharge device, with locking aid with tie of tie and guide of eyelets.
Full open base
It has a bottom with skirt, that allow a fast discharge and closure.
Protection options
Baffes
It has internally fixed baffes, which allow a better distribution of the product, avoiding excessive dilation during transportation and storage.
Inner Liner
It has inner liner, to guarantee the impermeability of the packaging and to facilitate the flow of the product, being able to be loose or glued, thus guaranteeing the integrity of the product.
Baffle Liner
It has inner liner with fixed baffles, for better distribution of the product and to prevent leaks or contamination in the product.
Special models
Pallet Free
Support that does not damage the packaging, as it does not present pollution, like wood pins, dust, there is no need to perform chemical work (fumigation) substitute ideal for the wooden pallet.
Bag-holder
Produced with four loop to facilitate the handling, used to pack Big Bag (FIBC), Improving the transportation, without the problems arising from the use of conventional pallets so also provide low cost comparate with other products.